Process using Laser Method on 3-Phase Induction Motor and Spray Washing Pump to Overcome Misalignment
DOI:
https://doi.org/10.25077/aijaset.v5i3.256Abstract
The alignment process using the laser method is one of the alignment techniques that can be applied to address misalignment. The laser method operates by utilizing an infrared laser sensor to perform the alignment between the driving object, in this case the induction motor, and the driven object, namely the spray washing pump. The alignment process aims to align the shaft of the driving object (the induction motor) with the shaft of the driven object (the spray washing pump), ensuring that both shafts are properly aligned. Misalignment refers to a condition in which there is a lack of alignment between the driving shaft and the driven shaft.
References
[1] Li, Y., et al. (2020). Analysis of Shaft Misalignment Using Laser Alignment Systems. IEEE Transactions on Industrial Electronics, 67(4).
[2] Habibi, M., et al. (2018). Effects of Shaft Misalignment on Bearing Lifetime. Mechanical Systems and Signal Processing, 112.
[3] Suker Junior, S., et al. (2022). Analisis Pengaruh Misalignment Pada Kinerja Motor Induksi. Jurnal Teknik Elektro, 24, 18-25.
[4] Tendi Rahayu, A., et al. (2017). Pengaruh Misalignment Terhadap Arus dan Getaran Pada Motor Induksi. Jurnal Teknik Elektro, 12.
[5] Triyanto, A.S. (2023). Pengaruh Nilai Misalignment Pada Motor Tiga Fasa Terhadap Unit Chiller Water Pump Di Menara BCA.
[6] Sudjatmiko, D., et al. (2015). Mekanisme Proses Alignment Poros Mesin Rotasi.
[7] Aulia, R. et al. (2021). Vibration Analysis Due to Shaft Misalignment. IOP Conf. Series: Materials Science and Engineering, 1073.
[8] Kim, H. et al. (2019). Condition Monitoring of Induction Motors Under Misalignment Faults. IEEE Access, 7.
[9] Shakya, A., et al. (2017). Real-time Fault Detection Using Laser Alignment Tools. Journal of Vibration and Control, 23(11).
[10] Ramadhan, D. et al. (2022). Studi Eksperimen Laser Alignment pada Motor Industri. Jurnal Ilmiah Teknik Elektro, 14(2).
[11] ISO 10816-3:2009. Mechanical Vibration – Evaluation of Machine Vibration.
[12] Nguyen, H., et al. (2020). Effects of Misalignment on Shaft Coupling Systems. Mechanical Engineering Journal, 57(3).
[13] Duyar, A., et al. (2018). Misalignment Compensation Techniques in Rotating Machines. Measurement, 129.
[14] Shao, Y., et al. (2019). Influence of Shaft Alignment on Motor Efficiency. Energies, 12(10).
[15] Arifin, M. et al. (2021). Optimal Alignment Method for Rotating Shafts in Ship Engines. Jurnal Teknologi Maritim, 6(1).
[16] Roy, R., et al. (2022). Fault Diagnosis in Coupled Shaft Systems. Journal of Mechanical Science and Technology, 36(7).
[17] Lee, J., et al. (2016). Smart Laser Alignment System for Industrial Applications. Sensors, 16(5).
[18] Hidayat, N., et al. (2021). Studi Perbandingan Laser dan Dial Gauge untuk Alignment Poros. Jurnal Energi dan Teknologi, 13(4).
[19] Bansal, R., et al. (2017). Condition-based Monitoring in Rotating Machinery. Journal of Engineering for Gas Turbines and Power, 139.
[20] Rajendran, P., et al. (2020). Application of Laser Shaft Alignment in Marine Systems. Ocean Engineering, 195.
[21] Zhang, X., et al. (2019). Analysis of Coupling Misalignment Using Infrared Sensors. International Journal of Precision Engineering, 20(9).
[22] Muslih, A., et al. (2021). Evaluasi Ketidaksejajaran Poros pada Mesin Pompa. Jurnal Teknik Mesin, 11(2).
[23] Ahmad, R., et al. (2022). Laser-Based Fault Detection System for Electric Motors. Journal of Electrical Systems, 18(1).
[24] Prasetyo, D. et al. (2023). Pengaruh Alignment terhadap Umur Bearing. Jurnal Pemeliharaan Mesin, 9(1).
[25] Kurniawan, S., et al. (2020). Penerapan Metode Laser Alignment pada Industri Kapal. Jurnal Teknik Perkapalan Indonesia, 5(2).
[26] Sudjatmiko, D. d. (jULI 2015). Mekanisme Proses Alignment Poros Mesin Rotasi.
[27] Suker Junior S, A. S. (Maret 2022). Analisis Pengarus Misaligment Pada Kinerja Motor Induksi. Vol 24, 18-25.
[28] Tendi Rahayu, A. M. (2017). Pengaruh Misalignment Terhadap Arus dan Getaran Pada Motor Induksi. 12.
[29] Triyanto, A. S. (2023). Pengaruh Nilai Misalignment Pada Motor Tiga Fasa Terhadap Unit Chiller Water Pump Di Menara BCA. 158-166.
[30] cnzahid. (2023, September 21). Cara Alignment dan Peralatan yang digunakan. Retrieved from cnzahid.com: https://www.cnzahid.com/2015/02/tools-for-alignment.html?m=1 diakses tanggal 28 Mei 2025.
[31] etsworlds. (2023). Pengertian Misalignment Pada Poros. Retrieved from etsworlds.id: https://www.etsworlds.id/2018/10/pengertian-misalignment-pada-poros.html?m=1. Diakses pada tanggal 28 Mei 2025.
[32] Hyprowira. (2020, Juli 4). 9 Kelebihan Laser Shaft Alignment Dalam Industri. Retrieved from hyprowira.com: https://hyprowira.com/blog/laser-shaft-alignment. Diakses tanggal 29 Mei 2025
[33] hyprowira. (2020, Oktober 4). Definisi & Peralatan yang Digunakan pada Metode Alignment. Retrieved from hyprowira.com: https://hyprowira.com/blog/metode-alignment. Diakses pada tanggal 29 Mei 2025.
[34] Insinyoer. (2022, Maret 30). Alignment Pompa. Retrieved from insiyoer.com: https://www.insinyoer.com/alignment-pompa/. Diakses pada tanggal 29 Mei 2025.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Nofri Dodi, Akbar Abadi, Yudia Meka Septiani, Riza Widia, Ardiansyah Ardhi

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



