A Goal Programming Optimisation of Machining Parameters during the Production of Ti-Alloy Components on the CNC Lathe
DOI:
https://doi.org/10.25077/aijaset.v5i02.235Abstract
This experimental study, presents results of goal programming forecasting and optimising Ti6Al4V alloy components cutting conditions. During machining the optimising challenge concerns desirability of minimalising power consumption; cutting tool wear and cutting forces whilst simultaneously realising elevated material removal rate and advancing workpiece surface quality. Cutting process parameters optimisation is essential contemplation triggering proficient manufacturing activities enhancing competitiveness. Harmonising the miscellany machining conditions such that these contradictory intentions are, simultaneously, tackled portends well for sustainability of the machining activity. In this research, outside cutting tests were carry out, on the lathe machine, with coated carbide tipped tools at various parameter setting levels. Cutting speed and feed rate were characterised against dependent factors. Mathematical Modeling, was carried out in Minitab 22.1 Software. The models were uploaded on goal programme optimiser, LINDO/LINGO software, to predict the appropriate cutting parameters for a determinate machining situation. Goal Programme simulation results, with the performance factors equally weighted, produced optimum cutting parameters, vc = 227 mmin-1 and fn = 0.2416 mmrev-1. Validation experiments confirmed applicability of goal modeling in machining planning parameter prediction. Results showed fidelity of goal programming consistency as forecasting tool for titanium cutting parameters on the CNC lathe. Future research is delineated.
References
[1] J. W. Sutherland, S. J. Skerlos, K. R. Haapala, D. Cooper, F. Zhao, and A. Huang, “Industrial Sustainability: Reviewing the Past and Envisioning the Future,” J. Manuf. Sci. Eng., vol. 142, no. 11, Nov. 2020, doi: 10.1115/1.4047620.
[2] Q. Wang, Q. Gu, X. Li, and N. Xiong, “Comprehensive overview: Fleet management drives green and climate-smart open pit mine,” Renew. Sustain. Energy Rev., vol. 189, p. 113942, Jan. 2024, doi: 10.1016/j.rser.2023.113942.
[3] M. E. Korkmaz, M. K. Gupta, N. S. Ross, and V. Sivalingam, “Implementation of green cooling/lubrication strategies in metal cutting industries: A state of the art towards sustainable future and challenges,” Sustain. Mater. Technol., vol. 36, p. e00641, Jul. 2023, doi: 10.1016/j.susmat.2023.e00641.
[4] N. Tayisepi, L. Mugwagwa, M. Munyau, and T. M. Muhla, “Integrated Energy Use Optimisation and Cutting Parameter Prediction Model - Aiding Process Planning of Ti6Al4V Machining on the CNC Lathe,” J. Eng. Res. Reports, vol. 25, no. 10, pp. 226–242, Nov. 2023, doi: 10.9734/jerr/2023/v25i101022.
[5] H. D. Nguyen et al., “A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties,” J. Mater. Res. Technol., vol. 18, pp. 4641–4661, May 2022, doi: 10.1016/j.jmrt.2022.04.055.
[6] W. Zhang and J. Xu, “Advanced lightweight materials for Automobiles: A review,” Mater. Des., vol. 221, p. 110994, Sep. 2022, doi: 10.1016/j.matdes.2022.110994.
[7] N. Tayisepi, R. . Laubscher, and G. Oosthuizen, “Investigating the Energy Efficiency and Surface Integrity when Machining Titanium Alloys,” in International Conference on Competitive Manufacturing, 2016, pp. 219–224.
[8] S. Gütmen, S. K. Roy, and G.-W. Weber, “An overview of weighted goal programming: a multi-objective transportation problem with some fresh viewpoints,” Cent. Eur. J. Oper. Res., vol. 32, no. 3, pp. 557–568, Sep. 2024, doi: 10.1007/s10100-023-00861-5.
[9] H. Vereecken et al., “Modeling Soil Processes: Review, Key Challenges, and New Perspectives,” Vadose Zo. J., vol. 15, no. 5, pp. 2015–19, 2016.
[10] N. Ibrahim, S. Cox, R. Mills, A. Aftelak, and H. Shah, “Multi-objective decision-making methods for optimising CO2 decisions in the automotive industry,” J. Clean. Prod., vol. 314, p. 128037, Sep. 2021, doi: 10.1016/j.jclepro.2021.128037.
[11] N. Shamloo, E. Bakhtavar, K. Hewage, and R. Sadiq, “Optimization of hydraulic fracturing wastewater management alternatives: A hybrid multi-objective linear programming model,” J. Clean. Prod., vol. 286, p. 124950, Mar. 2021, doi: 10.1016/j.jclepro.2020.124950.
[12] A. Najafizadeh, A. Salajegheh, A. M. Rahmani, and A. Sahafi, “Multi-objective Task Scheduling in cloud-fog computing using goal programming approach,” Cluster Comput., vol. 25, no. 1, pp. 141–165, Feb. 2022, doi: 10.1007/s10586-021-03371-8.
[13] A. Nabhani, E. Mardaneh, and H. K. Sjølie, “Multi-objective optimization of forest ecosystem services under uncertainty,” Ecol. Modell., vol. 494, p. 110777, Aug. 2024, doi: 10.1016/j.ecolmodel.2024.110777.
[14] J. Kaur, O. Singh, A. Anand, and M. Agarwal, “A goal programming approach for agile-based software development resource allocation,” Decis. Anal. J., vol. 6, p. 100146, Mar. 2023, doi: 10.1016/j.dajour.2022.100146.
[15] T. Alam, “Sustainable Multi-Objective Production Planning for the Refrigerating and Air Conditioning Industry in Saudi Arabia: A Preemptive Goal Programming Approach,” Sustain., vol. 15, no. 4, 2023, doi: 10.3390/su15043346.
...
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 NICHOLAS TAYISEPI, Daniel M Madyira, Trust Tawanda, Lameck Mugwagwa

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



